Intelligent

Flexible

Digital

Networked

Home page

8000A Stator Winder

The winding machine adopts Panasonic PLC. The X, Y, Z, S spindles wind terminal and decide the winding direction.The S, Z, X spindles automatically wind and align wires. The wire head and wire tail can be wound directly to the terminal, or not. In order to switch products, only need to replace the part holder and call the appropriate program. The winder is suitable for single-slot internal-winding stators.

ONLINE CONSULTATION

product details

Product map

Local graph

Local graph

Advantages

01

Control by Panasonic PLC
02

The wire head, wire tail and overwire can be realized together in the same side mechanism or on the opposite side.
03

The wire head, wire tail and overwire can be realized together in the same side mechanism or on the opposite side.
04

Just replace the part holder and call the corresponding program to switch products.
05

Stability rate of over 99%
06

10 years of production on day and night shifts with a 1% replacement rate for parts

Equipment parameters

Complete the process and wind
2 or 4

Applicable range
Outer diameter less than Φ130, inner diameter more than Φ10, total stator height less than 100mm (two products outer diameter less than Φ150)

Applicable wire diameter
Φ0.1~Φ1.2 (realized by different tensioners)

Winding method
X, Yand Z axes insert pin, and S, Z,and X axes wind and align wie

Align wire
Automatically

Wire head and tail processing
Automatic processing

Up/Discharge method Manual

Winding speed up to 1000r/m, related to the product size, wire diameter, specific speed according to the product given

Power
13.6KW

Gas source
0.4~0.7MPa

Power supply
Three-phase AC 380V 50Hz 13KW

External dimensions
1500L*1200W*1700Hmm